A gasket is not just a gasket

Youwouldn’t use the same oil filter twice would you? Why even considerkeeping the same gasket then? When reinstalling a used gasket it has lostsome of its key abilities: it has already been compressed weakening itssealing capability. It might also have suffered from heat deformation peeling or other abuses. Remarks and related documents: Specificationsvalues determined by the test methods required for ASTM F-104 type 7materials.

Are your gaskets built to OEMspecs?

Regular aftermarket gaskets use a variety of cheapmaterials that offer inconsistent sealing results. RMSTATOR performancegaskets comply with the same standard as the OEM parts. We use thematerials prescribed by the standard on every gasket and make sure theproperties are the same.

Our gasket has a fully curedstyrene-butadiene rubber binder and a blend or aramid and cellulose fibres.It is intended for oil and water applications with short-duration maximumtemperatures up 290°C (550°F). *Nonasbestos gasketmaterial.

What makes thedifference?

• Higher material density- Our enhanced gaskets have less probability of leaking atthe same pressure.
• Maximum temperature- Our enhanced gasket material will keep its sealingproperties at a higher temperature.
• Minimum flangepressure- Our enhanced gaskets require less force to beapplied on the metal part to seal throughimperfections.
• Minimum tensile strength- Our enhanced gaskets will resist internal pressurebetter.

Please Note:

1. All electrical components mustbe fitted by a qualified technician.
2. Before fitting electricalcomponents ensure the root cause of the original failure has beenaddressed.
3. The absence of either of points 1 or 2 above