Our ground-breaking DialDim™ Lighting Controller features a multicolour halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; simply double click to switch between the two circuits. The controller also features high beam turn signal and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal flash your aux lights as a turn signal or strobe your lights when you sound your horn.

More Features More Feedback!

Our patent-pending multicolour halo dimmer switch can do a whole lot more than just turn your lights on and off and dim them. For starters it displays the exact intensity of both of your lights so you're never stuck guessing if your lights are on or what intensity they're set to.

Thanks to the electronically fused circuits the halo switch can also display and allow you to select the fuse values for each circuit. And if a fuse trips the LED halo will turn red providing real-time feedback and allow for resetting the fuse.

Last but not least the switch halo doubles as a battery monitor with a low- voltage cutoff feature. Our industry-first design will flash different colours on startup to display your battery health and automatically shut off your auxiliary lights if the battery voltage drops below 10.8 volts.

Features:

• ON/OFF & Dim - Independently control two sets of lights on/off and intensity level using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits.
• High/Low Sync - Your auxiliary lights will automatically sw